Synology DS1812 + 8x 2TB Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro NAS a úložné servery Synology DS1812 + 8x 2TB. Synology DS1812 + 8x 2TB Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk

Shrnutí obsahu

Strany 1 - Synology_QIG_18Bay_20111116

Synology DiskStation DS1812+ Quick Installation Guide Synology_QIG_18Bay_20111116

Strany 2 - Table of Contents

10 Chapter 2: Hardware Setup 2 Remove the 6 screws that secure the top case. Lift off the case and place it to the side. Important: When y

Strany 3 - Before You Start

11 Chapter 2: Hardware Setup 3 Check Total Physical Memory in Main Menu > System Information. If your DiskStation does not recognize th

Strany 4

12 Chapter 2: Hardware Setup 2 Remove the 4 screws that secure the fan panel. 3 Remove the malfunctioning fan: a Pull the fan panel from

Strany 5 - Safety Instructions

13 Chapter 2: Hardware Setup 4 Install the new fan: a Replace the malfunctioning fan with a good one (with the fan cable within the fan po

Strany 6 - Hardware Setup

14 Chapter 3 Chapter 3: Install DSM on DiskStation On a network computer, follow the steps in this chapter to install DSM on your DiskStation.

Strany 7

15 Chapter 3: Install DSM on DiskStation 3 Click Browse to locate the DSM_[model name]_[number].pat installation file in the DSM folder of

Strany 8

16 Chapter 3: Install DSM on DiskStation Install from Mac OS X 1 Insert the installation disc into your computer, and then double-click the

Strany 9 - Start Up Your DiskStation

17 Chapter 3: Install DSM on DiskStation 5 To run Synology Assistant, you can either use the following command: /path/install/SynologyAssis

Strany 10

18 Chapter 3: Install DSM on DiskStation Important: If you are using 64bit Ubuntu, you have to install the 32bit libraries before proceeding

Strany 11 - Replace System Fan

19 Chapter 3: Install DSM on DiskStation

Strany 12

2 Table of Contents Chapter 1: Before You Start Package Contents ...

Strany 13

20 Appendix A Appendix A: Specifications Item DS1812+ Internal HDD 3.5" or 2.5" SATA (II) x 8 Max. Capacity ‧24TB (8x 3TB hard dri

Strany 14 - Install DSM on DiskStation

21 Appendix A: Specifications Item DS1812+ Power Consumption And Environment Requirements ‧Line voltage: 100V to 240V AC ‧Frequency: 50/60Hz

Strany 15

22 Appendix B Appendix B: LED Indication Table LED Indication Color Status Description STATUS Green Static Volume Normal Off HDD Hibernat

Strany 16 - Install from Linux

SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEE

Strany 17 - 3.2-1944

INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGE

Strany 18 - Learn More

SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AN

Strany 19

Product specifications and such failure is attributable to causes not within or under Synology's control. Further, the foregoing warranties wi

Strany 20 - Specifications

proceedings will be final and binding on the parties, and judgment may be entered thereon in any court of competent jurisdiction. Customer understan

Strany 21

3 Chapter 1 Chapter 1: Before You Start Before you start setting up DiskStation, please check the package contents to verify that you have rec

Strany 22 - LED Indication Table

4 Chapter 1: Before You Start Synology DiskStation at a Glance No. Article Name Location Description 1) Power Button Front Panel The po

Strany 23 - END USER LICENSE AGREEMENT

5 Chapter 1: Before You Start Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does no

Strany 24

6 Chapter 2 Chapter 2: Hardware Setup Tools and Parts for Hard Disk Installation  A screwdriver  At least one 3.5" or 2.5" SATA

Strany 25 - LIMITED PRODUCT WARRANTY

7 Chapter 2: Hardware Setup 3 Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray. 4 Load t

Strany 26

8 Chapter 2: Hardware Setup Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function p

Strany 27

9 Chapter 2: Hardware Setup Start Up Your DiskStation 1 Use the LAN cable to connect DiskStation to your switch/router/hub. 2 Connect one

Komentáře k této Příručce

Žádné komentáře