Synology RS214 Instalační příručka stáhnout pdf (Strana 7)

7 Chapter 2: Hardware Setup

 For 2.5" Hard Disk:

Important: Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function

properly.

5 Insert the loaded hard drive tray into the empty hard drive bay. Press the handle in flush with the front panel to

hold the hard drive tray in place.

6 Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the "I" position) to lock the

handle of the hard drive tray, and then remove the key.

7 Repeat the steps above to assemble the other hard disk you have prepared.

8 Fix the two rack mount kits on both sides with their screws provided.

9 The disks’ positions are numbered as shown below.

Note: If you want to set up a RAID set, it is recommended that all installed hard disks are of the same size to make

the best use of hard disk capacity.

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Žádné komentáře

Synology RS214 Instalační příručka Strana 7