Synology DS3615XS Instalační příručka stáhnout pdf (Strana 12)

Chapter 2: Hardware Setup

Align the notch on the gold edge of the module with the notch in the memory slot.

Pushdownonthememorymodulewithrmandevenpressure.Theretainingclipswillsnapintopositionas

the module is correctly inserted.

Note:

Hold the memory module by its edges, and do not touch the gold connectors.

Replace the case and inner panel:

As you replace the inner panel, connect the cables you unplugged from the inner panel in step 2-c. Make

sure that the Drive Status Indicator connector from the A side should be plugged in the lower port, and that

from the B side in the upper one.

Replace the inner panel and tighten the 7 screws you removed in step 2-b.

Replace the top and side covers and tighten the 4 screws you removed in step 2-a.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Žádné komentáře

Synology DS3615XS Instalační příručka Strana 12